SolarFlash Profile Tile Kit
SFS007
- 1 x FlexiFlash
- 2 x Shims (packings)
- 1 x Foam Insert
- 1 x Metal Support
- 2 x Nails
- The FlexiFlash is the same size as the ‘small’ SolarFlash. It is made from a flexible material which allows it to mould around the curves on a profile tile. The dimensions of the FlexiFlash are 250mm width / 235mm length. The hood is 50mm wide / 140mm length / 40mm depth. The hood is the same size on all three types of SolarFlash. The length of the ‘FlexiFlash’ is based on tiles being single lap (up to 100mm head lap). The aluminium support has been included to support the flexible back of the FlexiFlash and must be used. *It can be quicker to cut the tile rather than notch* There is a foam included in every kit which is required to seal the hood. The foam was designed with snow in mind to stop wind taking light snow into the roof.
£5.50 Inc VAT
Out of stock
- 1 x FlexiFlash
- 2 x Shims (packings)
- 1 x Foam Insert
- 1 x Metal Support
- 2 x Nails
- The FlexiFlash is the same size as the ‘small’ SolarFlash. It is made from a flexible material which allows it to mould around the curves on a profile tile. The dimensions of the FlexiFlash are 250mm width / 235mm length. The hood is 50mm wide / 140mm length / 40mm depth. The hood is the same size on all three types of SolarFlash. The length of the ‘FlexiFlash’ is based on tiles being single lap (up to 100mm head lap). The aluminium support has been included to support the flexible back of the FlexiFlash and must be used. *It can be quicker to cut the tile rather than notch* There is a foam included in every kit which is required to seal the hood. The foam was designed with snow in mind to stop wind taking light snow into the roof.
